Traps
Back to top

Flexible Condensate Pipe Kit

Flexible Condensate Pipe Kit
Downloads
Flexible Condensate Pipe Kit comprising 1 x 3m length of 25mm flexible pipe, 6 x 25mm pipe clips, 2 x Straight connectors with universal connection suitable for 19/23mm rigid pipe and 25mm flexible pipe, 1 x 1½" plain tail ABS solvent weld reducer to 19/23mm rigid pipe and 25mm flexible pipe
  • For use in installation of condensing boilers
  • Eliminate use of traditional rigid discharge pipe and fittings thereby allowing complete flexibility to discharge point
  • Includes fittings for easy connection to sanitary pipework
  • Allows for disconnection in freezing conditions for discharge to be redirected into a receptacle
  • Particularly useful where installation space is restricted
  • Conforms to BS 6798:2009 and Building Regulations Approved Document H
  • Conents of kit are 1 x 3m length of 25mm flexible pipe, 6 x 25mm pipe clips, 2 x straight connectors with universal connections suitable for 19/23mm rigid and 25mm flexible pipe, 1 x 1½" plain tail ABS solvent weld reducer to 19/23mm rigid and 25mm flexible pipe
Product Code: CONFLEX-KIT1
Downloads

Multifit Connections

Multifit Connections

  • Most McAlpine Trap Outlets and Fittings have Multifit Connections.
  • Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
  • The moulded Internal Sleeve of the Connection, centres and supports the pipe.The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting. When the compression nut is turned hand tight the best possible mechanical joint is complete.
  • If a plastic pipe is undersize, or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
  • For technical reasons, it is not possible to manufacture Multifit Connections on all traps and fittings. Where Multifit is not provided the description Universal is applied. The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.

Download this Section of the Catalogue

Plastic Traps

Contact Us

McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals. On this basis we cannot accept installation queries from the general public. Please contact your local McAlpine stockist or a qualified plumbing professional. For all other enquiries please fill out the form below.

Files must be less than 4 MB.
Allowed file types: gif jpg jpeg png bmp txt pdf.
Join MacTrade Installers Club
The NEW portal for installers to discuss all the latest products, videos and training