Traps
Back to top

19mm Water Seal Shower Trap

STW1-R 70mm White Plastic
STW1-R 70mm White Plastic
STW1-R
STW5-R 85mm White Plastic
STW5-R
STW3-R 70mm CP Plastic
STW3-R
STW7-R 85mm CP Plastic
STW7-R
STW3-RB 70mm CP Brass
STW3-RB
STW7-RB 85mm CP Brass
STW7-RB
STW1-M 70mm White Plastic Mushroom
STW1-M
STW5-M 85mm White Plastic Mushroom
STW5-M
STW3-M 70mm CP Stainless Steel Mushroom
STW3-M
STW7-M 85mm CP Stainless Steel Mushroom
STW7-M
Downloads
19mm Water Seal Shower Trap with Universal Outlet
  • Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
  • Suitable for shower trays with a 52mm waste hole
  • 19mm Water Seal
  • 1½" BSP Thread
  • Supplied with 95° Bend - BSP coupling nut x 1½" Multifit
  • Waste grid and dip tube removable to facilitate easy cleaning
  • Flow rate 50 l/min when tested under a constant 120mm head of water in accordance with clause 5 of BS EN 272-2:2002
  • Overall Height 95mm
  • Constructed from polypropylene
Flange
Product Code
70mm White Plastic
STW1-R
85mm White Plastic
STW5-R
70mm CP Plastic
STW3-R
85mm CP Plastic
STW7-R
70mm CP Brass
STW3-RB
85mm CP Brass
STW7-RB
70mm White Plastic Mushroom
STW1-M
85mm White Plastic Mushroom
STW5-M
70mm CP Stainless Steel Mushroom
STW3-M
85mm CP Stainless Steel Mushroom
STW7-M
Downloads

Multifit Connections

Multifit Connections

  • Most McAlpine Trap Outlets and Fittings have Multifit Connections.
  • Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
  • The moulded Internal Sleeve of the Connection, centres and supports the pipe.The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting. When the compression nut is turned hand tight the best possible mechanical joint is complete.
  • If a plastic pipe is undersize, or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
  • For technical reasons, it is not possible to manufacture Multifit Connections on all traps and fittings. Where Multifit is not provided the description Universal is applied. The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.

Download this Section of the Catalogue

Plastic Traps

Contact Us

McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals. On this basis we cannot accept installation queries from the general public. Please contact your local McAlpine stockist or a qualified plumbing professional. For all other enquiries please fill out the form below.

Join MacTrade Installers Club
The NEW portal for installers to discuss all the latest products, videos and training