Wet Room Products
Back to top

150mm Tile Drain

TILE-PLAIN-B Plain Brushed
TILE-PLAIN-B Plain Brushed
TILE-PLAIN-B
TILE-PLAIN-P Plain Polished
TILE-PLAIN-P
TILE-LOVE-B
TILE-LOVE-B
TILE-MAC-B
TILE-MAC-B
TILE-SOLEIL-B
TILE-SOLEIL-B
TILE-TRIBAL-B
TILE-TRIBAL-B
150mm Square Stainless Steel Tile Drain for use with 50mm Water Seal trap body
  • Available in Brushed of Polished Stainless Steel in 5 designs
  • Tiles suitable for use with ST90-70B, ST90-HP2B or ST90-HPB Shower Traps
  • Grade 304 Stainless Steel
  • Tiles reversible to accommodate tiles up to 8mm
  • Frame height adjustable to suit tiles up to 16mm
  • Supplied with adjustable height support legs for concrete floor installations
Tile
Product Code
Plain Brushed
TILE-PLAIN-B
Plain Polished
TILE-PLAIN-P
"Love" Design (Brushed)
TILE-LOVE-B
"Mac" Design (Brushed)
TILE-MAC-B
"Soleil" Design (Brushed)
TILE-SOLEIL-B
"Tribal" Design (Brushed)
TILE-TRIBAL-B

Assembly & Features

The drain is suitable for concrete and suspended timber floors finished with tiles or stone.

Features - Tile Drain

Installation Guidelines

Tiled Drain

The following instructions refer to the installation of the tile drain only. They do not include information regarding installation of other elements of the shower cabin, such as sealing the connections between the shower walls and floor, or waterproofing - commonly known as room tanking.

  • Set the level of the finished shower floor surface and mark the wall in line with the area where the channel will be installed. Allow for the slope of the shower surface area.
  • Connect the channel to the drainage system trap and waste discharge pipework and set the height using the adjustable legs so that the upper edge of the channel frame is approximately 1mm below the finished surface level of the shower area.
  • Fill the surface under and around the channel with screed or a similar product to the level of the flange.
  • Cover the flange and surrounding area with a flexible latex waterproofing (liquid form membrane).
  • Apply the sealing membrane in position on the freshly applied liquid.
  • Apply a second coat of liquid membrane to the whole surface of the shower area and sealing membrane.
  • Once the liquid is completely dry, as per the manufacturer’s instructions, the shower surface can then be tiled.
  • Seal the gap between the tiles and the tile drain with a flexible sanitary silicone which can be compatible with the tile grout colour.

Download our latest Wet Room Brochure

Wet Room Brochure

Contact Us

McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals. On this basis we cannot accept installation queries from the general public. Please contact your local McAlpine stockist or a qualified plumbing professional. For all other enquiries please fill out the form below.

Files must be less than 4 MB.
Allowed file types: gif jpg jpeg png bmp txt pdf.
Join MacTrade Installers Club
The NEW portal for installers to discuss all the latest products, videos and training