Traps
Back to top

Mechanical Soil and Rainwater Pipe Boss Connector

BOSSCONN1.25BL Black
BOSSCONN1.25BL Black
BOSSCONN1.25BL
BOSSCONN1.25GR Grey
BOSSCONN1.25GR
Mechanical Soil and Rainwater Pipe Boss Connector for 1¼" pipe
  • Available in Black or Grey
  • For 1¼" pipe
  • Allows condensate discharge from condensing boiler to be discharged via soil or rainwater pipe
  • Conforms to BS 6798:2014 and Building Regulations Approved Document H
Colour
Product Code
Black
BOSSCONN1.25BL
Grey
BOSSCONN1.25GR

Multifit Connections

Multifit Connections

  • Most McAlpine Trap Outlets and Fittings have Multifit Connections.
  • Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
  • The moulded Internal Sleeve of the Connection, centres and supports the pipe.The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting. When the compression nut is turned hand tight the best possible mechanical joint is complete.
  • If a plastic pipe is undersize, or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
  • For technical reasons, it is not possible to manufacture Multifit Connections on all traps and fittings. Where Multifit is not provided the description Universal is applied. The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.

Download this Section of the Catalogue

Plastic Traps

Contact Us

McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals. On this basis we cannot accept installation queries from the general public. Please contact your local McAlpine stockist or a qualified plumbing professional. For all other enquiries please fill out the form below.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.