Back to top

90mm Shallow Shower Trap - 70mm High

ST90CP10-70 CP Plastic
ST90CP10-70 CP Plastic
ST90CB10-70 CP Brass
ST90CPB-P-70 CP Brass - Petal
ST90CPB-S-70 CP Brass - Slotted
ST90WH10-70 White Plastic
ST90MB10-70 Matt Black
90mm x 50mm Water Seal Shower Trap with 1½" Outlet
  • Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
  • Suitable for shower trays with a 90mm waste hole
  • 50mm Water Seal
  • 1½" BSP Thread
  • Supplied with 135° Bend - BSP coupling nut x 1½" Universal
  • Removable 110mm flange facilitates easy cleaning
  • Flow rate 34 l/min when tested under a constant 15mm head of water in accordance with clause 5 of BS EN 274-2:2002
  • Overall height is only 70mm
  • Constructed from polypropylene
  • Conforms to EN 274-1:2002
  • 70mm under-tray dimension
  • Traps ST90CP10-70, ST90CB10-70 and ST90WH10-70 are suitable for tray thickness 0-23mm
  • Traps ST90CPB-P-70 and ST90CPB-S-70 are suitable for tray thickness 5-30mm
  • Note: Longer flanges are available to suit thicker trays with a tray thickness between 0-26mm.

    • For Product codes ST90CP10-70, ST90CB10-70, ST90WH10-70: additional longer flange code is: STW9030WSTBDY-43MM
    • (NB: There are no longer flanges available for ST90CPB-P-70 or ST90CPB-S-70)

Product Code
CP Plastic
CP Brass
CP Brass - Petal
CP Brass - Slotted
White Plastic
Matt Black

Multifit Connections

Multifit Connections

  • Most McAlpine Trap Outlets and Fittings have Multifit Connections.
  • Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
  • The moulded Internal Sleeve of the Connection, centres and supports the pipe.The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting. When the compression nut is turned hand tight the best possible mechanical joint is complete.
  • If a plastic pipe is undersize, or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
  • For technical reasons, it is not possible to manufacture Multifit Connections on all traps and fittings. Where Multifit is not provided the description Universal is applied. The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.

Download this Section of the Catalogue

Plastic Traps

Contact Us

McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals. On this basis we cannot accept installation queries from the general public. Please contact your local McAlpine stockist or a qualified plumbing professional. For all other enquiries please fill out the form below.

This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.