Traps
Back to top

90mm Shower Trap

ST90CP10 CP Plastic
ST90CP10 CP Plastic
ST90CP10
ST90CB10 CP Brass
ST90CB10
ST90CPB-P CP Brass - Petal
ST90CPB-P
ST90CPB-S CP Brass - Slotted
ST90CPB-S
ST90WH10 White Plastic
ST90WH10
90mm x 50mm Water Seal Shower Trap with 1½" Outlet and removable 110mm Flange
  • Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
  • Suitable for shower trays with a 90mm waste hole
  • 50mm Water Seal
  • 1½" BSP Thread
  • Supplied with 135° Bend - BSP coupling nut x 1½" Universal
  • Removable 110mm flange facilitates easy cleaning
  • Flow rate 26 l/min when tested under a constant 15mm head of water in accordance with clause 5 of BS EN 274-2:2002
  • Overall height 82mm
  • Manufactured in polypropylene
  • Conforms to EN 274-1:2002
  • 82mm under-tray dimension
  • Suitable for tray thickness 0-17mm
  • Note: Longer flanges are available to suit thicker trays with a tray thickness between 7-24mm.

    • For Product codes ST90CP10, ST90CB10, ST90WH10: additional longer flange code is: STW90W/BODY-L
    • For Product code ST90CPB-P: additional longer flange code is:
      P-CPB-ST90-P-43MM
    • For Product code ST90CPB-S: additional longer flange code is:
      P-CPB-ST90-S-43MM
Flange
Product Code
CP Plastic
ST90CP10
CP Brass
ST90CB10
CP Brass - Petal
ST90CPB-P
CP Brass - Slotted
ST90CPB-S
White Plastic
ST90WH10

Multifit Connections

Multifit Connections

  • Most McAlpine Trap Outlets and Fittings have Multifit Connections.
  • Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
  • The moulded Internal Sleeve of the Connection, centres and supports the pipe.The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting. When the compression nut is turned hand tight the best possible mechanical joint is complete.
  • If a plastic pipe is undersize, or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
  • For technical reasons, it is not possible to manufacture Multifit Connections on all traps and fittings. Where Multifit is not provided the description Universal is applied. The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.

Download this Section of the Catalogue

Plastic Traps

Contact Us

McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals. On this basis we cannot accept installation queries from the general public. Please contact your local McAlpine stockist or a qualified plumbing professional. For all other enquiries please fill out the form below.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.