Wet Room Products
Back to top

Valve Shower Gully for Sheet Flooring

Valve Shower Gully, White Plastic Clamp Ring and Cover Plate, 1½" Horizontal Outlet
  • Available with a White Plastic Cover Plate with or without securing screws
  • 1½" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
  • Sheet floor gully suitable for concrete and suspended timber floors
  • Manufactured in ABS to the highest quality
  • The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.
  • Eliminates the release of foul air due to back flow..
  • Overall height of only 75mm and suitable for installation in floors where depth is restricted.
  • The valve can be easily removed to facilitate easy cleaning
  • Flow rates of up to 36 l/min when tested under a constant 15mm head of water in accordance with clause 5 of BS EN 272-2:2002
  • Note that as there are currently no regulations to cover the use of anything other than water seal traps in domestic drainage, it is advisable to seek guidance from the local building control department prior to use.
Cover Plate
Product Code
White Plastic
White Plastic without securing screws

Assembly & Features

Features - VSGs

General Information

General Info - VSGs

Gullies with Non-Return Valves

The Valve Shower Gully (VSG) has been developed to satisfy customer demand for a shallow gully suitable for installation in floors where depth is restricted.

Download our latest Wet Room Brochure

Wet Room Brochure

Contact Us

McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals. On this basis we cannot accept installation queries from the general public. Please contact your local McAlpine stockist or a qualified plumbing professional. For all other enquiries please fill out the form below.

This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.