Valve Shower Gully for Tiled or Stone Floors

VSG1T6SS

VSG1T6WH

Downloads

Installation Instructions

Technical Drawing

Valve Shower Gully, Tile with removable Grid, 1½" Horizontal Outlet

Available with 150mm Polished Stainless Steel or White ABS Tile
1½" BS EN 1329-1:2020 Solvent Weld Horizontal Outlet
Sheet floor gully suitable for concrete and suspended timber floors
Manufactured in ABS to the highest quality
The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.
Eliminates the release of foul air due to back flow..
Overall height of only 75mm and suitable for installation in floors where depth is restricted.
The valve can be easily removed to facilitate easy cleaning
Flow rates of up to 36 l/min when tested under a constant 15mm head of water in accordance with clause 5 of BS EN 274-2:2002
Note that as there are currently no regulations to cover the use of anything other than water seal traps in domestic drainage, it is advisable to seek guidance from the local building control department prior to use.

Tile

Product Code

Polished Stainless Steel

VSG1T6SS

White ABS

VSG1T6WH

Enquire now

Downloads

Installation Instructions

Technical Drawing

Contact Us

McAlpine plumbing products are designed and manufactured to be installed by qualified plumbing professionals. On this basis we cannot accept installation queries from the general public. Please contact your local McAlpine stockist or a qualified plumbing professional. For all other enquiries please fill out the form below.

form.antibot { display: none !important; } You must have JavaScript enabled to use this form.

Valve Shower Gully for Tiled or Stone Floors

Assembly & Features

General Information

Gullies with Non-Return Valves

Download our latest Wet Room Brochure

Contact Us